;aperture wheel file generated by EAGLE
;remove the above line to prevent this file from being overwritten!
;this sample has been altered for display purposes
D10 draw 0.0000in
D12 round 0.1760in
D14 rectangle 0.0380in x 0.0300in
D19 octagon 0.0630in
D34 square 0.0960in
D90 oval 0.0850in x 0.1700in
Phone: (403) 250-3406
Fax: (403) 250-3465
3-1112 40th Ave NE
Calgary, AB Canada T2E5T8
Open Monday through Friday
Support: 5:30AM to 3PM MT
Reception: 10AM to 4PM MT
Time Zone Cut Offs
Tool Size Quantity Plated
T01 0.019 3 Yes
T02 0.035 3 Yes
T03 0.152 1 No
If you did not order online and sent in a data package, our support team will provide you with a link to an online order form. You will require your job number to complete it.
Once this form has been completed, please allow about 30 minutes for it's detail to be added to your project.
Support Hours of Operation are:
Monday through Friday
5:30AM to 3PM MT
Please review our Calendar page for plant holidays
Order forms completed outside of regular Support Hours must wait for operations to resume on our next business day before it can be integrated with your data package.
Standard FR4 Laminate
Drill Diameters are "Finished"
Drill Diameter Tolerance 0/+.008"
Adjust tools to free sizes where possible
Saturday delivery required
Fedex Tracking number required
My cell number is 1-555-555-1212
Resolution Output Settings
2.3 = 00.000 to 99 inches in Thousandth Inch increments
2.4 = 00.0000 to 99 inches in Ten Thousandths Inch increments
Thousandth of an inch is often expressed as "1 thou" and is exactly equal to: 0.001 inches, 0.0254 mm, or 25.4 um (1 inch is equal to 1,000 thou)
We Support Both Imperial and Metric
Either of these measurement systems are compatible with our manufacturing. Don't mix them in your outputs. Gerber and NC files must be produced in the same measurement system. This prevents subtle alignment issues between Gerber pads and NC holes.